The Log Gap Cap™ reduces air infiltration where round logs meet window and door trim. Though designed to work with 6" to 10" diameter logs, the Log Gap Cap’s uniform shape fits most log profiles. With an easy scissor cut along the flat side, they work in log siding applications. The material is resistant to mold, rot, bacteria, and will not absorb moisture.

No matter what product you use to clean bare wood, nothing is more important than making sure you have adequately rinsed the surface. Any chemical residue remaining on the wood can have serious consequences later on.

We always recommend using pH Strips to make sure that the surface of the wood has been sufficiently rinsed, preferable to a pH of between 6.5 and 7.5.

100 Ea.

$19.95

Order Online

Use with a high-speed grinder to cut, carve and shape log surfaces.

• Smooth, continuous cutting provides ease of control and desirable finish
• Carving, sculpting, log improvement and repair
• For use with high speed angle grinder

Sanding disks provide superior results over high-grinding disks.

• A corresponding diameter sanding disk holder is required for use
• Available in diameters of 4", 5" and 7" in coarse, medium and fine grit
• For use with low speed angle grinder

These buffing brushes are ideal for surface preparation after removing a finish by chemical stripping or media blasting.

• Requires a buffer or polisher with 5/8 x 11 UNC threads, 10 amp motor, 600-3,000 RPM Variable speed
• Nylon fibers impregnated with Ultra Grit abrasive
• Long Lasting

High quality stain brushes for interior and exterior use.

Use these to "tool out" log home chinking and sealants. Spatulas and trowels are instrumental in creating a smooth sealant finish after applying Perma-Chink, Energy-Seal, Woodsman, or Check Mate 2. 

Use to apply Log Chinking and Sealants.

Small Bag	Large Bag
$10.49 - Call to Order	$11.99 - Call to Order

Log and Timber Fasteners

We’ve made some changes to our new Log Boss fasteners. At the request of many of our customers we’ve brought the wings back and redesigned the head for better counter sinking and a 5/16” hex head driver.

The wings reduce the friction between the wood and the shank and clear out the splinters created as the fastener pulls down into the wood. This reduces the torque required to set the fastener into place. So if you want a fastener with maximum holding power and superior strength with less work, Log Boss is the answer. These fasteners were specifically designed by Perma-Chink Systems for the construction of log and timber structures. Their 3” long thread provides the grip necessary for pulling even the most difficult logs into place while the larger shank diameter increases the overall strength and pulling power.