Cedar Wash
Surface Prep Cleaner for Cedar
Cedar Wash is a ready-to-use cleaner specifically formulated for preparing wood species that contain high levels of wood extractives and resin oils. It is ideal for cleaning cedar decks, log siding, and surfaces without damaging the wood.
We highly recommend Cedar Wash Wood Cleaner for the following: Western Red Cedar, Redwood, Walnut, Mahogany, Southern Pine, Douglas Fir, Spruce, and Cypress log homes.
Proper application removes dirt, grease, grime, pollen, and surface stains before applying Lifeline™ exterior finishes, Log & Timber Defense, or Deck Defense.
Shop Available Sizes
Whether you’re preparing a small section of siding or an entire exterior, Cedar Wash is available in two container sizes. Both arrive ready to use, so the focus stays on preparing the wood rather than mixing products before work begins.
Product Information
Bare wood is not always ready for stain. Every finish depends on the surface beneath it. Residue left after construction or stripping affects how evenly a finish bonds across the surface. Cedar Wash helps correct that problem before application begins.
Features
- Effective formula for Western Red Cedar, Redwood, Walnut and Mahogany
- Removes resin oils and wood extractives from the surface
- Removes dirt, dust, pollen, and other foreign substances from wood surfaces
- Environmentally friendly
- Ready-to-use formula requires no mixing before application.
- Suitable for preparing new construction and previously stripped wood surfaces.
- Helps improve surface conditions before staining cedar siding, decks, and log homes.
Resource Links
How to Store
Replace the lid securely after each use. The extra effort prevents contamination. Cedar Wash should remain in the original container. After cleaning cedar decks or surfaces, store where freezing temperatures and extended periods of heat can be avoided.
Application Tech Tips
Keep the surface uniformly wet during cleaning. Prep cleaners perform best when applied from the bottom of the wall upward. The solution needs time to loosen residue without creating streaks. Finish with a thorough top-down rinse. Wood must dry completely before applying primer or stain.
Maintenance
Routine cleaning does not require this product. Bare wood exposed after stripping, media blasting, or heavy sanding benefits from another treatment before a new finish is applied. Proper preparation at that stage creates the right conditions for the next coating.
Application Temperature
40° to 90°F
Application Methods
- Garden pump sprayer
Special Instructions
- Apply from bottom-up, rinse from top-down
- Rinse thoroughly
- Safe to use on chinking and sealants
Shelf Life
3 Years
Frequency
As needed
Coverage Rate
- 175-225 square feet / gallon
Recommended Products
Frequently Asked Questions
Cleaner FAQ
Why do I need to wash my log home?
Log homes tend to collect more dirt and debris because of the rounded logs. The top of the log collects debris, making the home look dirty. Log Wash is designed to keep your home looking great and maintaining an excellent finish.
Which cleaner do I need for my log home?
We offer two cleaners, Log Wash and Cedar Wash. Most log homes will use Log Wash, but homes with Cedar, Redwoods, etc., will need Cedar Wash. Read more about choosing the right one here.
How do I treat dark stains or grayed wood?
We offer two products designed to restore the bare wood from stains and weathering – Oxcon and Wood ReNew. Read more about what they do here.
