Strip-It
Professional-Grade Log Home Stain Remover
Old finishes eventually need to come off before the wood underneath gets a fresh start. Strip-It removes multiple layers in a single application, reducing log preparation time for refinishing.
This water-based log home finish remover works on interior and exterior wood surfaces. The pH-neutral formula has no odor and will not raise the grain. It also leaves the natural wood color alone rather than darkening or discoloring the surface.
Strip-It is biodegradable and non-flammable. The formula will not harm chinking or sealants, which makes it practical for restoration work on existing log homes.
Shop Available Sizes
Strip-It comes in a 5-gallon pail. Larger restoration projects will require an assessment to determine necessary amounts. One gallon covers up to 55 square feet. A free sample is available for testing before work begins.
Product Information
Older wood may have several layers of finish left from previous applications. StripIt log home stain remover penetrates those coatings and loosens them from the surface for removal.
Unlike caustic chemical strippers used for log home restoration, the formula is pH-neutral. Aluminum and other metals will not corrode or discolor from contact with the product. Once the old coating is gone, the logs are ready for the cleaning and preparation steps that follow.
Features
- Removes most finishes from logs, siding, and deck surfaces
- Will not harm chinking and sealants
- Will not corrode or discolor aluminum or other metals
- Environmentally friendly
Resource Links
How to Store
Freezing temperatures will damage Strip-It log home stain remover, so keep the container protected during colder months. Secure the lid after each use and mark the purchase date for reference. Shelf life is two years when stored properly.
Maintenance
Keep an eye on each section after applications. Do not let loosened finish sit longer than necessary. Once the log home finish remover has done its job, scrape away the old coating and rinse the area thoroughly. Fresh water helps carry away remaining product and finish residue before they dry on the wood.
Application Temperature
40° to 90°F
Application Methods
Safety equipment, bucket, brush or roller, paint scraper, rags, and pressure washer capable of generating at least 500 to 600 psi
Surface Preparation
Dirt Free
Shelf Life
2 Years – Protect from freezing
Special Instructions
Apply from bottom-up, rinse from top-down
One to two applications, depending on severity
Rinse thoroughly from top down
Coverage Rate
45-55 square feet / gallon
Application Videos and Tips
Proper technique matters when working with finish removers for log home restoration. Strip-It should be applied from the bottom up, then thoroughly rinsed from the top down once the old coating has been removed.
Use only as directed and always follow instructions on the label.
Removing Stains & Finishes with StripIt
Applying Finish Removers With Airless Sprayers
Make it easy to apply StripIt with an airless sprayer.
Recommended Products
Frequently Asked Questions
Your questions about StripIt answered.
My log home needs to be refinished, what do I do?
If your log home has an unknown finish, it’s best to take it down to bare wood. If you know that it’s been finished with Perma-Chink Systems products, you can clean and reapply finish or topcoat. For the best products to use, read this.
How to apply finish removers using airless sprayer?
Most people use brushes to apply our finish removers but they can be applied with airless sprayers as long as you know what to do. Read more here.
What should I do if my log home is really dark or discolored?
Dark or discolored log homes can mean a couple of things. One is it’s dirty and a thorough cleaning will bring back the original look. Another is the wrong finish was applied and it’s covered in mold, mildew, and other stains. Restoration steps begin here.
