S-100 Water Based Finish Remover for Log Homes
S-100 Finish Remover is an environmentally friendly water-based solvent that removes many oil and water-borne finishes from logs, siding, and decks. Perma-Chink Systems developed a finish remover using new technology originally developed for removing paint from aluminum aircraft surfaces.
Supplied as a ready-to-use gel, it is easily applied with a short bristled brush, paint roller, or airless sprayer. Within a few minutes it begins to soften the finish and since it is a gel, it stays wet and active for a fairly long period of time. Once the finish has sufficiently softened, it can be removed by simply pressure washing.
S-100 will not darken or discolor the wood, will not corrode or discolor metal surfaces, nor will it harm log home chinking or sealants. Although it is effective for removing most log home finishes, there are some high performance coatings that may require a more aggressive chemical stripper. Perma-Chink Systems recommends that a sample of S-100 be obtained from them and tested on the finish you want to remove prior to placing an order.
S-100 Available Sizes
S-100 Finish Remover comes in 5 gallon pails for easily removing log home finishes.
Product Information
S-100 removes multiple layers of log home finishes in one application.
Features
- Removes most finishes from logs, siding and deck surfaces
- Will not harm chinking and sealants
- Will not corrode or discolor aluminum or other metals
- Environmentally friendly
Resource Links
Disposal: Dispose of unused product and empty containers in accordance with local, state, and federal regulations. S-100 is a water-based, low-VOC product. To protect the environment, do not pour unused product into drains or waterways.
Application Temperature
40° to 90°F
Application Methods
Safety equipment, bucket, brush or roller, paint scraper, rags, and pressure washer capable of generating at least 500 to 600 psi
Surface Preparation
Dirt Free
Shelf Life
5 Years
Special Instructions
Apply from bottom-up, rinse from top-down
One to two applications, depending on severity
Rinse thoroughly from top down
Coverage Rate
50-100 square feet / gallon
Application Videos and Tips
Removing Old Stains & Finishes
Applying Finish Removers With Airless Sprayers
Make it easy to apply S-100 with an airless sprayer.
Recommended Products
Frequently Asked Questions
Your questions about S-100 answered.
My log home needs to be refinished, what do I do?
If your log home has an unknown finish, it’s best to take it down to bare wood. If you know that it’s been finished with Perma-Chink Systems products, you can clean and reapply finish or topcoat. For the best products to use, read this.
What do I do about log rot?
We have the perfect solution for repairing log rot in wood with our E-Wood and M-Balm products. Read more here.
What should I do if my log home is really dark or discolored?
Dark or discolored log homes can mean a couple of things. One is it’s dirty and a thorough cleaning will bring back the original look. Another is the wrong finish was applied and it’s covered in mold, mildew, and other stains. Restoration steps begin here.
