Blog

Cedar Wash™- Ready-to-Use Cleaner for Redwoods, Western Red Cedar, Walnut and Mahogany

The most important step of finishing wood whether it is a log wall, a piece of log siding or a piece of wood furniture is the surface preparation prior to applying a finish system to the wood surface. The reason this topic is so important is that this step or process has an impact on the longevity and durability of the system…

Cedar Wash is designed to remove surface resin oils and high concentrations of water-soluble wood extractives in addition to dirt, grease, grime, pollen, and surface mold and mildew without harming the wood. Wood extractives are compounds present in bark, softwood and heartwood of a tree that contribute to such properties of wood as color, odor, decay and insect resistance. Consequently, these extractives can also discolor paint and finishes (water soluble extractives) as well as create adhesion issues (oil soluble extractives) for many coating types.  All wood species contain wood extractives; however, there are a handful of wood species that are characterized as extractive rich woods. This group includes Redwood, Western Red Cedar, Walnut and Mahogany. The second group of wood species that also contains higher levels of wood extractives but not as high as the extractive rich woods include Southern Pine, Douglas Fir, Spruce and Cypress.      

• Designed specifically for Western Red Cedar and Redwood (Softwoods) and Walnut and Mahogany (Hardwoods).
• Highly recommended cleaner for Southern Pine, Douglas Fir, Spruce and Cypress.
• Removes resin oils and wood extractives from the surface of the wood that may interfere with adhesion of LIFELINE™ exterior stains or Prelude™ to the wood surface.
• Removes dirt, dust, pollen and other foreign substances from log surfaces.
• Will not harm finishes that are in good condition.
• Contains an aggressive detergent package for efficient cleaning of the wood surface.
• Safe to use on chinking and sealants.
• Easy to use, Ready-to-Use formula.
• Low environmental impact.

“Can’t believe it. The stain I ordered yesterday at 3pm arrived at 10am this morning. Incredible service & logistics from you, as well as UPS. Only in America!”

Jerry A. in TN

“One constant we have been able to depend on during our building project was the Perma-Chink System products and service. We are particularly pleased with the clear, non-yellowing, protection of Sure Shine satin hardwood floor sealer. Our beautiful Cypress flooring shines through.

We continue to enjoy the color tone of the Lifeline Exterior wood finish in Dark Natural used on the logs. The protection provided by the Advance topcoat is proving to be essential in the Montana environment. The combination of the Lifeline Interior Light Natural wood finish and Acrylic Satin on the interior logs show off the skip peel character of the Lodgepole logs. We couldn’t be more pleased with the color tones of our dream home. Finally, we highly recommend the use of Energy Seal sealant to keep the weather and bugs outside where they belong.

We are very satisfied with our decision to utilize Perma-Chink Systems products on our home. Not only now, but for future maintenance. We had the confidence to use the products knowing things were going to turn out right and as planned; easy use, clean-up and great results!

Thank you Perma-Chink, especially the Stevensville staff for all their help, tips and motivation.”

The Glazners, MT

Here is my story! we live in eastern Kansas-south of KC 50 miles. Not a lot of log homes back here-but my father lives in central Idaho– friends in southern Missouri both have log homes. I have spent a lot of time in your country so I am very familiar with log homes, chinking and different coating products.

We built our ranch style home 20 years ago and used cedar lap siding on it. needless to say it was literally falling off by 09′ so here is what we did. a friend in Idaho owns a saw mill and I had him cut a whole load of fir into full 2″ x 10″ boards. we hauled them back to Kansas, ricked the up and dried them for 6-8 months. After they had properly dried I started the process of precutting everything to fit the house, following that we stained all sides of each board- and then applied 3 coats of your sealer to ALL sides of each board. After they were all installed we put one more top coat on the outside surface and then started the chinking process. I will tell you that I was dreading this part–however you sent me the stuff in 5 gal. pails– used a bulk gun–and the disc to fill the gun. IT WAS SIMPLE!! We are very proud of what the final product has turned out.

My opinion is that you have the BEST product out there. the water base stuff was so much easier to deal with but when it dried its thick–shines and to this day there is no where on my house that needs any attention. Back here we have to deal with major humidity. By sealing all sides of every board the sealer has kept anything from cracking or checking. I have just watched my friend have a contractor restore his cabin. sandblast, re chink and refinish the entire cabin. Holy cow- I can only think that if he would have used Perma chink products he still might have a fat billfold. anyway thanks for your product. I know where to go when its time for a little touch up.. have a great day.

Tim D., KS

“Hi Kevin, This is wintertime view of the front (north) of our home.

We applied Perma-Chink Products to the south side last October.

 We tested the existing finish before deciding how much work to do.

 This is the nearly completed south side.

Very satisfying to caulk and seal the logs and to have a durable finish on them. A worthwhile project, thanks to quality materials from Perma-Chink.

Thanks.”

 Bob W. in NV

“Hello, Terry. This is Bob D. I am writing a letter of thanks to you about Jennifer Stroud. She has been an outstanding saleslady in guiding me through my cabin-refinishing project, and because of her patience and expertise, I now have a place that looks like new. She understands the products and knew what would give me the best results. I had several issues with the cabin, and she helped me resolve them. I am extremely happy with what I’ve accomplished, but I felt you should know what a valuable employee you have in Jennifer and what a great job she does in representing the Perma-Chink product line. Thanks!”

Bob D. in TX

“Hi Kathy, 

I realized that I had forgotten to thank you for taking the time to provide an analysis of how we can help restore our square log home with Perma-Chink products.  You were wonderful to work with and give a highly knowledged and comprehensive understanding of what we need to do.

We received the sample kit and plan to begin next spring as soon as the weather is supportive.  It will be a big project.

Many thanks and kind regards.”

Michael L. in IA

“Awesome. You guys are very customer focused. I recognize and appreciate that and will certainly be a return customer. Thanks again Terry!”

Dave A. in NY

“Thank you for such great advice at the seminar. My decks are done and I started my garage. I will always use Perma-Chink products.”

From Becky C. in NC

“I’d like to send a strong “Hurray” for both Perma Chink products and West Fork Log Homes. Verdell and his crew just completed blasting, restaining and sealing our log home with Perma Chink products. It’s BEAUTIFUL! Our home has never looked better and I can honestly say that I’m perfectly happy with the way it now looks.

A representative of Perma Chink actually visited the work site and was very personable and informative about interior processes that I want to undertake. The West Fork crew was GREAT! They were friendly, knowledgeable, hardworking, and conscientious about doing a really good job. I would most highly recommend both Perma Chink and West Fork Log Homes to anyone who wants to make their home brand new again.”

Jayne B. in NE

“I want to thank you for everything.  Your folks are great to work with… Talk to u soon!”

Michael T. in OR