Log Home Using Perma-Chink Systems Eco-Friendly Stains and Sealers
Woodpeckers cannot tell the difference between the wood in your home and dead trees in the forest, so they occasionally cause damage to logs, siding, or fascia boards. People attribute this damage to woodpeckers pecking for grubs in the wood, but that is not always the case. There are three main reasons that woodpeckers peck on wood; one, they are looking for something to eat, two, they are defining their territory and three, they are making a nest. It is usually the second reason that it creates the most damage.
Woodpeckers are very territorial. In order to let other woodpeckers know that this is his (or in some cases her) territory, it flies around the perimeter of its territory, usually in the morning, and initiates a series of raps on hollow trees or other wood members that have the “right” sound. This behavior is called “drumming” and consists of two or three long brrrrrrrrrrrps. The woodpecker will typically drum in one spot for a minute or so, day after day. It does not take long before a large, irregular hole appears at the drumming site. If the site is a log or siding of a home, it can become a real eye sore.
When a woodpecker pecks for grubs in wood it acts differently and makes smaller cone-shaped holes or a long gallery. If you have ever seen a woodpecker searching for grubs it will constantly turn its head as if looking for something on the wood. It is actuality listening for grubs feeding in the wood. All it needs to do is make a hole large enough for its tongue. A woodpecker’s tongue is long and thin and that is what it uses to catch a grub in a gallery. The holes woodpeckers make searching for grubs are usually no more than an inch or so in diameter. Occasionally a woodpecker will attempt to excavate out a round nesting hole in a log, but it is rare and if the wood is sound, it will usually give up after a few days. However, they will make a hole in synthetic chinking to establish a nesting site.
Solving the Problem
One thing you can try to discourage drumming woodpeckers is to put a piece of metal window screen over the area where the woodpecker drums. This often discourages it enough that it will go elsewhere. Fake owls, snakes, and other scare devices may work for a little while, but it does not take exceedingly long for the woodpecker to discover that if it just ignores it, nothing happens. Trapping and releasing woodpeckers aren’t highly effective either. They can fly and unless you release them miles away, they will return to their home territory within a few days.
For woodpeckers feeding on beetle grubs, the best solution is to kill the grubs in the wood and the way to do that is to treat the wood with a borate. This will kill the beetle larvae and if there are no grubs for the woodpecker to search for, it will move on to better feeding sites. However, borates are not effective for eliminating or preventing carpenter bees so other methods of control must be used.
Three types of woodpeckers that occasionally damage log homes
Through late fall to early spring, we occasionally receive calls about Lifeline Advance topcoat turning milky white after application, a condition called blushing. Before discussing blushing, the formulas for both Lifeline Advance Gloss and Satin have recently been modified to reduce the probability of blushing without altering any of their properties.
Blushing is mostly caused by atmospheric humidity, reduction in rate of solvent evaporation, and low temperatures. Any water that gets trapped or incorporated into the film may cause blushing. This is particularly noticeable on shaded walls, especially where Lifeline Advance has been applied too heavily. Once Lifeline Advance has a chance to dry and cure this whitening should disappear, but it may take several warm, dry days. There is not much anyone can do to help speed up the curing process. When the blushing occurs on a few logs, using a hairdryer on the area can sometimes help (do not use hot air). Often, the best thing is to do nothing. If blushing occurs in the fall, it may take until spring for the Advance to completely resolve and turn clear.
The best way to avoid blushing is to apply the Lifeline Advance when the conditions are most favorable for success. For example, avoid applying when the temperatures are low and relative humidity is high. Dew formation is more likely as well as an increased risk for blushing. Instead, apply it during warm and dry conditions when possible.
Blushing does not affect the durability or performance of the finish. It is, however, cosmetically unattractive until the arrival of warm, dry weather. Once the Lifeline Advance is clear, blushing should never re-occur.
Restacking History: Expert Chinking Brings a Reclaimed Cabin Back to Life
Tucked into its natural surroundings, a small cabin built from reclaimed wood was given new life with a thoughtful addition – blending old character with new craftsmanship. The cabin was dismantled and restacked in Wauconda WA, a very remote location 4 hour drive from Seattle near the Canadian border.
The project was completed by Jeff Kyger of Northwest Log Home Care, who brought his experience and attention to detail to every stage of the finish.
Working with reclaimed materials can be challenging, especially when it comes to irregular corners and joints. Chinking the corners of the cabin required patience and precision, but Jeff handled it with skill and confidence. Using Perma Chink® chinking in his favorite color, Medium Gray #224, he achieved clean, consistent lines that complemented the cabin’s rustic charm while providing long lasting protection.
The result is a beautifully finished cabin that honors its past while embracing modern performance – proof that with the right products and expertise, even the most challenging details can shine.
Protect Your Log Home with a Finish System Built to Last. Perma-Chink Systems offers one of the longest-lasting stain and finish systems in the industry – backed by a limited 5-year warranty.
Your stain and finish system is more than just color – it’s your home’s first line of defense against the elements.
How Long Should a Log Home Finish Last?
One of the most common questions we hear from homeowners and industry professionals is:
“How long do your stains and finish last?”
It’s an important question because your stain and finish system protects one of your biggest investments – your log or timber home.
Here’s the short answer:
👉 Our system is among the longest-lasting in the industry.
We stand behind it with confidence by offering a limited 5-year warranty on our stain and finish system.
Why Longevity Matters
A high-quality stain and finish system does more than enhance appearance – it protects your home from:
- UV damage
- Rain and moisture intrusion
- Premature weathering
- Loss of beauty and curb appeal
Without proper protection, sunlight and water can break down the wood surface over time – affecting both the look and structural performance of your home.
Proper Prep = Maximum Longevity
To achieve the best results and qualify for warranty coverage, proper surface preparation is essential.
REQUIREMENT: Before applying stain, the wood surface must be:
- Clean
- Free of contaminants and residual chemicals
- Completely dry
Proper preparation is one of the most important steps in ensuring a long-lasting, beautiful finish.
Use the Right Products for Surface Prep
For best results, always use products specifically formulated for log homes.
Log Wash™
Ideal for general cleaning and maintenance. In most cases, this is all you need to prepare your logs before staining.
Wood ReNew™ or Oxcon™
If your wood has experienced UV damage or weathering, these products help remove damaged wood fibers and restore a brighter, healthier surface before staining.
Important:
Rinse thoroughly after cleaning. If unsure, use pH strips to confirm the surface is within a normal range of 6.5–7.5 pH.
The Lifeline™ System Advantage
Perma-Chink Systems’ Lifeline™ wood finish system is designed to deliver long-term performance and beauty.
Step 1: Stain
Lifeline stains provide rich, natural color while allowing the wood grain to show through – even after years of reapplication.
Step 2: Topcoat
Lifeline Advance™ clear topcoat enhances durability, reduces maintenance, and adds depth and luster to your finish.
Available in:
- Satin
- Gloss
Benefits of Lifeline Advance™:
- Superior UV protection
- Enhanced durability
- Improved water resistance
- Longer coating life
- Extremely high coverage
- Environmentally friendly
Flexible. Breathable. Built to Perform.
All Lifeline products are designed to be flexible and breathable, allowing moisture vapor to escape while helping prevent water from penetrating the wood.
Think of it like high-performance fabric for your home – durable, protective, and built to move with the natural expansion and contraction of wood.
Why Choose Perma-Chink Systems?
Homeowners and professionals trust Perma-Chink Systems because our products deliver:
- Proven long-term performance
- Beautiful, natural finishes
- Reduced maintenance over time
- A complete, compatible system approach
- Confidence backed by warranty
Protect Your Investment
Your log or timber home deserves more than just a finish – it deserves long-term protection.
Choose a system designed for durability, beauty, and performance.
Need Help Getting Started?
Not sure which products you need or how to begin?
Our team is here to help you choose the right system for your project.
Call us 1-800-548-3554
Perma-Chink Systems, Inc., a long-standing provider of wood care solutions for log and timber homes, is celebrating its 45th anniversary in 2026. Since its founding in 1981, the company has focused on helping homeowners, contractors, builders, and manufacturers protect and preserve wood structures through purpose-built products and practical expertise.
In its early years, Perma-Chink Systems introduced the industry’s first flexible chinking – an innovation that addressed long standing challenges in making log homes energy efficient. That early work helped establish a foundation for continued product development and long-term relationships throughout the log and timber home community.
Over the decades, the company has expanded its offerings to include a comprehensive range of specialty sealants, high-performance finishes, preservatives, and cleaners, all designed specifically for the unique demands of log and timber homes. Today, these products are used on a wide range of structures, from cozy cabins to expansive log and timber-frame residences.
Perma-Chink Systems’ progress has been shaped by the experience of its team, whose combined decades of hands-on work in log home care inform both product development and customer support. That practical knowledge continues to guide the company’s approach to research, technical assistance, and education.
“Reaching 45 years is a reflection of the relationships we’ve built and the trust our customers have placed in us through the years,” said Terry Knight, CEO of Perma-Chink Systems. “Our founder, Rich Dunstan, believed strongly in doing things the right way—listening to customers, standing behind our products, and acting with integrity. Those values continue to guide how we operate today.”
As the log and timber home industry has evolved, Perma-Chink Systems has remained focused on supporting those who build, maintain, and live in wood homes. The company’s emphasis on technical guidance, customer service, and thoughtfully engineered products has made it a consistent resource for professionals and homeowners alike.
Looking ahead, Perma-Chink Systems remains committed to building on its experience while continuing to improve how log and timber homes are cared for. Through ongoing product development, service, and education, the company aims to support the long-term durability and beauty of wood homes for years to come.
About Perma-Chink Systems, Inc.
Perma-Chink Systems, Inc. manufactures wood care products formulated specifically for log and timber homes, including chinking, sealants, stains, finishes, cleaners, and restoration systems. Founded in 1981, the company serves homeowners, builders, and contractors with specialized products and technical support grounded in decades of industry experience.
Read about the invention of first log home chinking: Perma-Chink Systems History – The Invention of the First Log Home Sealant – Perma-Chink Systems
Contractor: Ferrari Structures & Woodworks
This historic home in Chesapeake, Ohio, has quite a story. Local tradition says it was built by Jacob Suiter, a stout Pennsylvania Dutch settler, who hand-hewed the white oak logs on site and joined them with wooden pegs. The Ohio Historic Inventory (1976) records the date as 1824, though other sources suggest it may have been built as early as 1805–1825. That makes it the oldest known house in Chesapeake.
The main structure is a two-story, roughly 28′ x 35′, set on a 5′ crawl space/cellar. It originally featured half-dovetail log corners (a hallmark of German-influenced builders), with horsehair chinking later patched in with cement. A family room addition and enclosed front porch were built after 1925, using sandstone quarried right on the property. The upper gables were originally hand-split cedar shakes, which the client asked us to update with cedar shakes vinyl siding for easier upkeep.
In restoring the home, we removed layers of cement that had been applied over the logs and carefully assessed the structure. Twenty-one logs had to be replaced — all with white oak salvaged from a deconstructed 1815 structure in Wheeling, WV. These reclaimed logs were in excellent condition, and it was exciting to bring 200-year-old timbers back into service. We removed the paint on the logs, repaired and replaced chinking throughout, replaced the old fascia and window trim with rough-sawn hemlock and corrected a long-standing gap between the chimney and the house. The roof framing showed sawn rafters rather than rounded poles, which was an interesting detail.
For finishing, we used Perma-Chink Systems products: Log Wash, Ultra-7 in Gentry Gray, Lifeline Advanced Gloss Clear Coat, Stone-colored Perma-Chink log chinking and Chink Paint, and Dark Natural Energy Seal (which blends more naturally into the logs).
It’s been an honor to help preserve this remarkable piece of history for the current owners, The Nelson’s. Many thanks to Wilderness Woods for supplying the reclaimed oak and hemlock materials and to Perma-Chink Systems for their fantastic Products. Here are informative links to the house with a pre-addition and pre-restoration photos: Oldest House in Chesapeake Ohio | Jacob Suiters House in Ohio
Perma-Chink Systems Products Used
- Log Wash
- Lifeline Ultra-7 – Gentry Gray
- Lifeline Advanced Gloss Clear Coat
- Perma-Chink – Stone
- Chink Paint – Stone
- Energy Seal – Dark Natural
